OE Ref.:
4F0907275C
Commercial Name:
Beru-Huf Clamp-in Separate valve G2.2 315MHz Fiat Group
OEM Sensor P/N:
4F0907275C
Ean Code:
5054208000367
EZ-sensor® coverage:
YES
Nut Torque:
35.4 in-lbs (4 Nm) Nm
Screw Torque:
35.4 in-lbs (4 Nm) Nm
Valve Core Torque:
3.5 in-lbs (0.4 Nm) Nm
Note:
Compatible with all Huf Service Kits
WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to
www.P65Warnings.ca.gov.
EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.
Click on item for more details:
This list is being continuously updated.
Part No.:
1099
20023
20023
Commercial Name:
TPMS Service Pack
Note:
Contents: 1 Aluminum Nut, 1 Plastic Sealing Cap, 1 Rubber Grommet, 1 Nickel Plated Valve Core, 2 Aluminum Washers
Part No.:
1115
20037
20037
Commercial Name:
TPMS Service Pack Huf aluminum 43 mm Valve assembly
Note:
Overall Valve Length: 43 mm
Marking on Valve Ball: None
Contents: 1 Aluminum Valve Stem Assembled with Rubber Grommet, Aluminum Nut, Plastic Sealing Cap, Valve Core and Aluminum Washer, 1 Attachment Screw, 1 Installation Rod
Part No.:
1116
20038
20038
Commercial Name:
TPMS Service Pack Huf aluminum 48 mm Valve assembly
Note:
Overall Valve Length: 48 mm
Marking on Valve ball: Green
Contents: 1 Aluminum Valve Stem Assembled with Rubber Grommet, Aluminum Nut, Plastic Sealing Cap, Valve Core and Aluminum Washer, 1 Attachment Screw, 1 Installation Rod
EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.
Click on item for more details:
This list is being continuously updated.
Relearn Summary: Stationary Relearn
Relearn Description1. Inflate all tires to pressure listed on tire placard. 2. Turn ignition to ON/RUN position (engine off). 3. Press CAR function button. 4. Select TIRE PRESSURE MONITORING. 5. Select INITIALIZE WHEELS (select STORE CURR TIRE PRESSURES if resetting tire pressures). 6. Relearn can take 20 minutes to complete.
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found
here.