SHOPPING CART

BMW 1-Series
2008-01/2009-12

OEM Products

OE Ref.: 
36236781847
36236781847
  Beru-Huf Clamp-in Separate valve G2.3 433MHz BMW

Beru-Huf Clamp-in Separate valve G2.3 433MHz BMW
Please contact your Schrader Sales Rep or your Schrader TPMS distributor for pricing and availability. Product displayed for reference only, service kits might be available Click here to order
OE Ref.: 36236781847
Commercial Name: Beru-Huf Clamp-in Separate valve G2.3 433MHz BMW
Ean Code: 5054208001609
EZ-sensor® coverage: YES
Nut Torque: 35 in-lbs (4 Nm) Nm
Screw Torque: 35 in-lbs (4 Nm) Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:

Compatible with all Huf Service Kits

 
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  Auto Relearn
Relearn Description

If equipped with iDrive: 
1. Ensure all tires are inflated to the pressure listed on the tire placard. 
2. Turn ignition to the ON position (engine off). 
3. Using the iDrive controller, select “Settings” or “Vehicle Info”. 
4. Select “Vehicle”, “Vehicle/Tires” or “Vehicle Status”. 
5. Select “TPM”, “Reset TPM”, or “Perform Reset”. 
6. Start the engine, select “Reset”, “Yes”. 
7. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn. 

If not equipped with iDrive: 
1. Ensure all tires are inflated to the pressure listed on the tire placard. 
2. Start engine. 
3. Move turn signal toggle switch up or down until TPMS indicator and “RESET” are displayed. 
4. Press button at end of turn signal lever. 
5. Press and hold button at end of turn signal lever until “RESETTING” or a checkmark is displayed. 
6. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn. 

If not equipped with iDrive (for some models): 
1. Ensure all tires are inflated to the pressure listed on the tire placard. 
2. Start engine. 
3. Hold down the TPMS Reset button (located under the hazards button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials RDE on some models. 
4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn

Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Aftermarket Sensor

Part No.  
29138
29138
  Schrader Clamp-in VDA HUF FSK Trigger

Part No.: 29138
Commercial Name: Schrader Clamp-in VDA HUF FSK Trigger
OEM Sensor P/N: 228887 ; 239298 ; 248887 ; 282189 ; 36236771034 ; 36236779490 ; 36236781847 ; 36236798726 ; 4F0907275 ; 4F0907275B ; 4F0907275D ; 7P0907275 ; 7PP907275B ; 7PP907275F ; 95560602100 ; 95836166100 ; 99760602120 ; AD43-360671-AA; CD23-360671-CA ; 36236798726
Ean Code: 5054208008400
EZ-sensor® coverage: YES
Nut Torque: 71 in-lbs, 8Nm Nm
Valve Core Torque: 3.5 in-lbs, 0.4Nm Nm
Note:  
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20049
Commercial Name: TPMS Service Pack - Schrader Adjustable Angle Aluminum Valve Kit - Mercedes
Note:

20049 replaces 20047

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order

EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Programmable Sensor

Part No.  
33500
33500
  Schrader Snap-in Programmable EZ-Sensor 314.9 MHz / 315Mhz / 433MHz

Part No.: 33500
Commercial Name: Schrader Snap-in Programmable EZ-Sensor 314.9 MHz / 315Mhz / 433MHz
OEM Sensor P/N:
Ean Code: 651001215971
Nut Torque: -- Nm
Screw Torque: 11.5 in-lbs (1.3 Nm) Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:

EZ-sensor must be programmed prior to installation and relearned to the vehicle. A Programming Tool compatible with EZ-sensor is required. For maximum coverage, ensure your TPMS tool is updated to the latest software available.

(A)=45.4 mm; (B)=Type 3

 

NOTE : the transmission frequency of 315 MHz is not admissible in the EU

 
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20018
Commercial Name: EZ-sensor Service Pack - Rubber Valve Assembly
Note:

20018 replaces 20008

Contents: 1 Rubber Valve Stem assembled with Plastic sealing cap and Valve Core, 1 Stainless Steel Attachment Screw,

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order
Part No.: 34000
Commercial Name: Schrader Service Pack - Aluminum Valve
Note:

Contents: 1 Aluminum Valve Stem, 1 Aluminum Nut, 1 Rubber Grommet, 1 Plastic Sealing Cap, 1 Nickel Plated Valve Core, 1 Stainless Steel Attachment Screw

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order
Part No.: 34010
Commercial Name: Schrader Service Kit - Black Anodized Aluminum Valve
Note:

Contents: 1 Black Anodized Aluminum Valve Stem, 1 Black Anodized Aluminum Nut, 1 Rubber Grommet, 1 Black Plastic Sealing Cap, 1 Nickel Plated Valve Core, 1 Stainless Steel Attachment Screw

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order

EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Part No.  
33700
33700
  Schrader Clamp-in Programmable EZ-sensor 314.9 MHz / 315Mhz / 433MHz

Part No.: 33700
Commercial Name: Schrader Clamp-in Programmable EZ-sensor 314.9 MHz / 315Mhz / 433MHz
OEM Sensor P/N:
Ean Code: 5054208007083
Nut Torque: 71 in-lbs (8 Nm) Nm
Screw Torque: -- Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:

EZ-sensor must be programmed prior to installation and relearned to the vehicle. A Programming Tool compatible with EZ-sensor is required. For maximum coverage, ensure your TPMS tool is updated to the latest software available.

 

NOTE : the transmission frequency of 315 MHz is not admissible in the EU

 
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20049
Commercial Name: TPMS Service Pack - Schrader Adjustable Angle Aluminum Valve Kit - Mercedes
Note:

20049 replaces 20047

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order

EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.