SHOPPING CART

Mercedes-Benz ML-Class
2010-01/2012-01

OEM Products

OE Ref.: 
A0009054100
A0009054100
  Schrader Clamp-in Gen Alpha for Alloy / Steel rims 433MHz Daimler

Schrader Clamp-in Gen Alpha for Alloy / Steel rims 433MHz Daimler
Please contact your Schrader Sales Rep or your Schrader TPMS distributor for pricing and availability. Product displayed for reference only, service kits might be available Click here to order
OE Ref.: A0009054100
Commercial Name: Schrader Clamp-in Gen Alpha for Alloy / Steel rims 433MHz Daimler
Ean Code: 5054208000121
EZ-sensor® coverage: YES
Nut Torque: 53 in-lbs (6 Nm) Nm
Screw Torque: -- Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:  
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  Stationary Relearn
Relearn Description

Reset Air Pressure 
1. Inflate all tires to pressure indicated on tire placard. 
2. Turn ignition to ON/RUN position (engine off). 
3. Press forward/back button on steering wheel until trip and odometer are displayed. 
4. Press UP/DOWN button until tire inflation pressure monitor is displayed.
5. Hold down reset button (located on instrument cluster) until MONITOR CURRENT TIRE PRESSURE? is displayed. 
6. Press + button, TIRE PRESS. MONITOR-ACTIVATED!-PRESS. DISPLAY AFTER DRIVING A FEW MINS. is displayed. 
7. If REACTIVATE-TIRE PRESS. MONITOR! appears, repeat relearn procedure. 
8. If TIRE PRESSURE-CHECK TIRES! appears, indicates tire pressure too low, adjust pressures accordingly. Relearn New Sensor IDs Ensure all tires are inflated to the pressure listed on the tire placard. Vehicle must be driven for at least 10 minutes while maintaining speed above 15mph in order for system to learn new sensor IDs. If spare tire sensor ID is being programmed, a properly formatted scan tool is necessary. TIA troubleshooting tip: If vehicle does not relearn new sensor IDs, verify that the spare wheel was not introduced onto the vehicle. If the sensor that was originally listed in the “spare” position is replaced, then the new spare sensor ID has to be registered through the OBDII via a properly formatted scan tool.

Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Aftermarket Sensor

Part No.  
20213
20213
  Schrader Clamp-in Gen Gamma 433MHz Daimler

Part No.: 20213
Commercial Name: Schrader Clamp-in Gen Gamma 433MHz Daimler
OEM Sensor P/N: 41990-14002; A00035409017 ; A0009050030Q12 ; A0009057200 ; A0025409617Q05 ; A0045409017 ; HY53SE360671-AA ; A0009050030 , 41990-14002; A0009054100 ; A0025409617Q05 ; A0035409017 ; A0045409017 ; 320213; 41990-14002; A0009050030; A0009050030Q12; A0009050130; A0009054100; A0009057200; A0025409017; A0025409617Q05; A0035400217; HY53SE360671-AA
Ean Code: 5054208000985
EZ-sensor® coverage: YES
Nut Torque: 71 in-lbs (8 Nm) Nm
Screw Torque: -- Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:  
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20049
Commercial Name: TPMS Service Pack - Schrader Adjustable Angle Aluminum Valve Kit - Mercedes
Note:

20049 replaces 20047

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order

EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Programmable Sensor

Part No.  
33500
33500
  Schrader Snap-in Programmable EZ-Sensor 314.9 MHz / 315Mhz / 433MHz

Part No.: 33500
Commercial Name: Schrader Snap-in Programmable EZ-Sensor 314.9 MHz / 315Mhz / 433MHz
OEM Sensor P/N:
Ean Code: 651001215971
Nut Torque: -- Nm
Screw Torque: 11.5 in-lbs (1.3 Nm) Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:

EZ-sensor must be programmed prior to installation and relearned to the vehicle. A Programming Tool compatible with EZ-sensor is required. For maximum coverage, ensure your TPMS tool is updated to the latest software available.

(A)=45.4 mm; (B)=Type 3

 

NOTE : the transmission frequency of 315 MHz is not admissible in the EU

 
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20018
Commercial Name: EZ-sensor Service Pack - Rubber Valve Assembly
Note:

20018 replaces 20008

Contents: 1 Rubber Valve Stem assembled with Plastic sealing cap and Valve Core, 1 Stainless Steel Attachment Screw,

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order
Part No.: 34000
Commercial Name: Schrader Service Pack - Aluminum Valve
Note:

Contents: 1 Aluminum Valve Stem, 1 Aluminum Nut, 1 Rubber Grommet, 1 Plastic Sealing Cap, 1 Nickel Plated Valve Core, 1 Stainless Steel Attachment Screw

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order
Part No.: 34010
Commercial Name: Schrader Service Kit - Black Anodized Aluminum Valve
Note:

Contents: 1 Black Anodized Aluminum Valve Stem, 1 Black Anodized Aluminum Nut, 1 Rubber Grommet, 1 Black Plastic Sealing Cap, 1 Nickel Plated Valve Core, 1 Stainless Steel Attachment Screw

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order

EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.

Part No.  
33700
33700
  Schrader Clamp-in Programmable EZ-sensor 314.9 MHz / 315Mhz / 433MHz

Part No.: 33700
Commercial Name: Schrader Clamp-in Programmable EZ-sensor 314.9 MHz / 315Mhz / 433MHz
OEM Sensor P/N:
Ean Code: 5054208007083
Nut Torque: 71 in-lbs (8 Nm) Nm
Screw Torque: -- Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm
Note:

EZ-sensor must be programmed prior to installation and relearned to the vehicle. A Programming Tool compatible with EZ-sensor is required. For maximum coverage, ensure your TPMS tool is updated to the latest software available.

 

NOTE : the transmission frequency of 315 MHz is not admissible in the EU

 
 
  WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to www.P65Warnings.ca.gov.

EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.

Click on item for more details:

This list is being continuously updated.

Part No.: 20049
Commercial Name: TPMS Service Pack - Schrader Adjustable Angle Aluminum Valve Kit - Mercedes
Note:

20049 replaces 20047

99.99 € */each
Product displayed for reference only, service kits might be available Click here to order

EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.

Click on item for more details:

This list is being continuously updated.

Relearn Summary:  
Relearn Description
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found here.