OE Ref.:
40700-1AA0D
Commercial Name:
Schrader Clamp-in Gen2/3 315MHz Nissan
OEM Sensor P/N:
40700-1AA0D
Ean Code:
EZ-sensor® coverage:
YES
Nut Torque:
35.4 in-lbs (4 Nm) Nm
Screw Torque:
-- Nm
Valve Core Torque:
3.5 in-lbs (0.4 Nm) Nm
Note:
WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to
www.P65Warnings.ca.gov.
EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.
Click on item for more details:
This list is being continuously updated.
Part No.:
1091
20014
20014
Commercial Name:
TPMS Service Pack
Note:
Contents: 1 Aluminum Nut, 1 Plastic Sealing Cap, 1 Rubber Grommet, 1 Nickel Plated Valve Core
EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.
Click on item for more details:
This list is being continuously updated.
Relearn Summary: OBD Relearn
Relearn DescriptionAfter a tire rotation or tire replacement, the system will relearn itself under normal driving conditions. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
TIA troubleshooting tips:
- The vehicle may enter your service facility with the OBDII fuse blown. If your scan tool issues a communication error while writing sensor IDs, verify that this fuse is not blown.
- During some types of service, the TPMS sensors may shut off resulting in a MIL when you start up the vehicle after service. The MIL will turn off during normal driving conditions, or you can perform an ID relearn using a properly formatted scan tool to turn the MIL off in the service bay.
- If a multi-format sensor was installed on the vehicle, and the customer returns with a MIL, then use a properly formatted scan tool to read the vehicle DTCs. If any or all of the following codes are issued, replace the multi-format sensor with an OE 1:1 equivalent.
DTC Codes: C1720, C1721, C1722, C1723, C1724
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found
here.