OE Ref.:
43130-78J00
Commercial Name:
Schrader Clamp-in Gen J 314.9MHz GM Global A ASK Basic
OEM Sensor P/N:
43130-78J00
Ean Code:
EZ-sensor® coverage:
YES
Nut Torque:
62 in-lbs (7 Nm) Nm
Screw Torque:
-- Nm
Valve Core Torque:
3.5 in-lbs (0.4 Nm) Nm
Note:
WARNING: This product contains chemicals including lead, which is known to the State of California to cause cancer and reproductive issues.
For more information, go to
www.P65Warnings.ca.gov.
EZ-sensor® GO is pre-programmed for all vehicles mentioned in the list. No programming is required before installation for the below applications. Additionally, the sensor can be programmed to 99% of all vehicle makes, models and years.
Click on item for more details:
This list is being continuously updated.
Part No.:
1094
20017
20017
Commercial Name:
TPMS Service Pack
Note:
Contents: 1 Black Anodized Aluminum Nut, 2 Plastic Sealing Caps (Grey and Black), 1 Rubber Grommet, 1 Nickel Plated Valve Core, 1 Aluminum Washer
Part No.:
1107
20030
20030
Commercial Name:
TPMS Service Pack
Note:
Contents: 1 Aluminum Nut, 2 Plastic Sealing Caps (Grey & Black), 1 Rubber Grommet, 1 Nickel Plated Valve Core, 1 Aluminum Washer
EZ-sensor® GO can be programmed to any Make Model and Year shown in this list.
Click on item for more details:
This list is being continuously updated.
Relearn Summary: Stationary Relearn
Relearn Description1. If equipped with standard entry system, turn ignition to the ON position, then proceed to step 4.
2. If equipped with keyless entry system, turn ignition to the ACC position.
3. Using keyless entry system: hold lock and unlock buttons simultaneously until horn sounds, and then LF turn signal will become illuminated, proceed to step 5.
4. Using DIC: press and release INFO button until TIRE LEARN message is indicated on display. Hold down SET/ RESET button until horn sounds and LF turn signal is illuminated.
5. Starting with LF tire, increase/decrease tire pressure until horn sounds.
6. After horn sounds proceed as in step 5 for the next 3 sensors in the following order: RF, RR, LR. After completing LR tire, horn will sound twice.
7. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.
Relearn Procedure as PDF document
Mounting Instructions
Note:
Sensor images shown in this document are for illustration purpose only!
Phisical sensor body may be different.
Non contractual document!
For tecnical information, please contact your supplier or leave a message at info@Schrader TPMS E-Catalog.com
User Manual/Quick Start Guide
Note:
Document contains full description user manual and / or Quick Start Guide. Non contractual document!
For technical information, please contact your supplier or leave a message at SchraderNA@sensata.com
Approvals and Declarations
Note:
Package contains FCC, IC and CE certifications
Physical sensor body may be different.
Other documents can be also found
here.